Sale!

SIBOOR Voron2.4 Upgrade Dragon CoreXY 3D Printer 350mm FDM DIY Full-set WIFI Control FLY Gemini Mainboard

$1,299.00 $1,019.00

Why ChooseSIBOOR V2.4R2 Complete 3D Printer Kit？

1. Phaetus Dragon High Flow Hotend, Compatible with filamentsincluding:  ABS,Nylon, HIPS, ASA, CARBON, PLA, TPU, PETG, PC, etc.

2. Klipper Pre-Installed, SIBOOR kit include Orange Pi and 8-axis Spider board. No need Raspberry Pi more.

3. Complete ABS printed parts, no need to speed 250 hours to print by customer self.

4. Full PC sealing plate, high temperature resistance, no deformation, sound insulation and noise reduction, tight sealing

5. NSKJapan Bearing. POWGE synchronous pulley, idler pulley, OMC Stepperonline motor.

4.X-axis HIWIN MGN12 line rail，Y axis, Z axis LIN DENG MGN9H line rail

5. Includes the Hot-end AB adapter board, XY PCB limit board, and Z-axis limit PCB board. And it comes with 14PIN MX connector Teflon drag chain cable, XY limit PCB board extension cable, Z axis limit PCB extension cable. Wiring cables are all crimped with English labels on. Easy to use, greatly reducing the need for crimping and wiring difficulties.

300mm：Complete& High Quality V2.4 R2 300x300x300mm CoreXY 3D PrinterKit

350mm：Complete& High Quality V2.4 R2 350x350x350mm CoreXY 3D Printer Kit

Note:

System card, do not format, plug in the power, connect to Wi-Fi, you can print normally

Afterburner with ABS Parts： shipped with the Afterburner and a set ABS parts，No decorative parts included

Stealthburner with ABS Parts： shipped with the stealthburner and a set ABS parts，No decorative parts included

99 in stock

SKU: NS-0274-350 Category:

Description

List of shipping lists for V2.4

“2.4 Full et of screws “

M5x30 BHCS *30pcs，M5x10 BHCS *40pcs，M5x16 BHCS *35pcs，M4x6 BHCS *8pcs，M3x6 BHCS *6pcs，M3x30 SHCS *25pcs，M5x40 SHCS *22pcs，M3x40 SHCS *28pcs，M3x20 SHCS *29pcs，M3x16 SHCS *14pcs，M3x8 SHCS *209pcs，M5 Hexnut *26pcs，M5 T-nut HNTAJ5-5 *61pcs

M3 T-nut HNTAJ5-3 *130pcs，M3 Threaded Insert *90pcs，M3 Washer*2pcs，M3 Hexnut *7pcs，M4 Knurled Nut *4pcs，M3 Hammer Head T-nuts*50pcs

“Free tools”

Needle nose pliers blue style *1pcs，3D Printing Model Trimming Knife Scraper Too 1pcs，Cable management slot 25×25×38cm 2pcs

Blue knife 1pcs，Nylon CNC printed parts 1pcs，Crimping Tool 1pcs，Solder Iron 1pcs

“Motion”

GT2 20T Pulley (5mm ID 6mm W) 3pcs  ,  GT2 20T Toothed Idler (5mm ID 6mm W) 2pcs

GT2 20T Toothed Idler (5mm ID 9mm W) 4pcs  ,  GT2 16T Pulley (5mm ID 6mm W) 4pcs

F695 Bearing 20pcs ,  625 Bearing 12pcs , 5x35mm Shaft 1pcs  ,  5x60mm Shaft 4 pcs

GT2 Belt Loop (6mm W) – 188mm 4pcs , GT2 Open Belt LL-2GT-9 (9mm wide) – 1010mm 4pcs

GT2 Open Belt LL-2GT-6 (6mm wide) – 1800mm 2pcs

BNG Extruder Componnets Kit 1pcs , MGN9H 350mm 6pcs , HIWIN MGN12H 350MM 1pcs

“Electronics“

NEMA17 Motor 17HS19-2004S 6pcs , NEMA17 Motor 17HS08-1004S 1pcs

XY limit switch PCB board 1pcs , Z-axis limit switch PCB board 1pcs

Hot end transfer PCB board 1pcs , Omron Q5 1pcs

Phaetus Dragon Hotend 1pcs , 24V 50W Heating pipe 1pcs

Du magnesium wire thermistor 1pcs , 40x40x20 Centrifugal Fan (24V) 1pcs

40x40x10 Axial Fan (24V) 1pcs  ,  60x60x20 Fan (24V) 3pcs

“Power outlet”1pcs

FYS Spider Eight-axis motherboard 1pcs  ,  Mini 12864 Display 1pcs

TMC2209 Stepper Motor Driver 7pcs  ,  Mean Well LRS-200-24 PSU 1pcs

Delixi Solid State Relay 1pcs , DIN Rail Mount Bracket for G3A SSR 1pcs

C13 Power Cord(For USA) 1pcs , Thermal Fuse (120C) 1pcs , card reader 1pcs

“Vibration Management “

Rubber Compressor Foot *4pcs

“Frame”

OpenBuilds Angle Corner Connector *4pcs  ,  DIN 3 Rails (35mm W) – 420mm *2pcs

Misumi NFSB5-2020-290mm* 1pcs  ,  Misumi NFSB5-2020-380mm *1pcs

Misumi NFSB5-2020-400mm *2pcs  ,  Misumi NFSB5-2020-420-TPW *10pcs

Misumi NFSB5-2020-480-LCP-RCP *4pcs

“Miscellaneous”

PC4 01 Pneumatic connector* 2pcs ,  6x3mm Neodimium Magnet *8pcs

Bowden Tube 100mm Piece (For Spool Holder) * 2pcs  ,  3M tape* 1pcs

“Cables”

Nylon Cable Ties 4″ *40pcs

24AWG Silicone Cable (Red,250ft total) *25pcs

24AWG Silicone Cable (Black,250ft total) *25pcs

Spade Crimp Terminal 4.8mm Female *10pcs

JST XH Connector Plug 4 Position *10pcs

JST XH Connector Plug 2 Position *10pcs

JST XH Connector Plug 3 Position *10pcs

MicroFit3 Connector Plug 4 Position *5pcs

MicroFit3 Connector Plug 3 Position *3pcs

MicroFit3 Connector Plug 2 Position *4pcs

MicroFit3 Connector Receptacle 4 Position *5pcs

MicroFit3 Connector Receptacle 3 Position *3pcs

MicroFit3 Connector Receptacle 2 Position *4pcs

JST XH Female Pin* 40pcs  ,  MicroFit3 Female Pin *40pcs

MicroFit3 Male Pin *40pcs

XY axis drag chain 10*11 can be opened R18,388mm *2pcs

Z-axis drag chain 10*15 can be opened R38,540mm *1pcs

“Panels”

Coroplast Sheet – 420x420x4 mm *1pcs

Coroplast Sheet – 420x420x4 mm *1pcs

Coroplast Sheet – 434x454x4 mm *1pcs

PC Sheet Clear – 217x454x2.5 mm *2pcs

PC Sheet Clear – 434x454x2.5 mm *2pcs

PC Sheet Clear – 434x434x2.5 mm *1pcs

“Buildplate”

PEI 0.04″ Sheet – 12″x12″ *1pcs    ,    MIC6 5/16″ Plate – 12″x12″ *1pcs

Keenovo Silicone AC Heater w/ thermistor – 250x250mm (450W) *1pcs

“Tools”

Allen key set of 7 pieces TT007 *1pcs  ,  Double head screwdriver *1pcs

Small flat-blade screwdriver with plastic handle *1pcs

Additional information

Weight 30 kg
Dimensions 50 cm

Reviews

There are no reviews yet.

Be the first to review “SIBOOR Voron2.4 Upgrade Dragon CoreXY 3D Printer 350mm FDM DIY Full-set WIFI Control FLY Gemini Mainboard”

Related products