Sale!
New Sale
Ender 3 V2/Ender 3 Pro Upgrade to VORON E3-Switchwire Kit
$359.00 – $475.00
Order SIBOOR E3 SW with ERCF V2 KIT now, can get $15 off.
Automatic refund within 24 hours after placing the order.
Note that the E3-SW is not a complete 3D printer kit.
It is an upgrade kit to change entry level Ender3 V2 or Ender3 Pro (only compatible with these two printers) to professional level VORON E3-Switchwire, so that can change printing speed from 80mm/s to 200mm/s, and can print ABS, PA, etc. filament.
UNBOXING!!
https://www.youtube.com/watch?v=uBySJCPS-Tg
Additional information
| Weight | 15 kg |
|---|---|
| Dimensions | 50 × 60 × 36 cm |
| ABS Printed Parts | Without, Included |
E3-SW BOM LIST
| style | Name | Quantities | Specs |
| “Fasteners | M3×8 SHCS | 134 | Black Nickel Plated |
| M3×10 SHCS | 4 | Black Nickel Plated | |
| M3×12 SHCS | 46 | Black Nickel Plated | |
| M3×16 SHCS | 12 | Black Nickel Plated | |
| M3×20 SHCS | 10 | Black Nickel Plated | |
| M3×25 SHCS | 8 | Black Nickel Plated | |
| M3×30 SHCS | 15 | Black Nickel Plated | |
| M3×40 SHCS | 15 | Black Nickel Plated | |
| M3×50 SHCS | 4 | Black Nickel Plated | |
| M5×40 SHCS | 12 | Black Nickel Plated | |
| M4×6 SHCS | 2 | Black Nickel Plated | |
| M4×20 SHCS | 3 | Black Nickel Plated | |
| M5×10 BHCS | 40 | Black Nickel Plated | |
| M5×16 BHCS | 35 | Black Nickel Plated | |
| M5×20 BHCS | 2 | Black Nickel Plated | |
| M5×25 BHCS | 8 | Black Nickel Plated | |
| M5×30 BHCS | 10 | Black Nickel Plated | |
| M5×40 BHCS | 8 | Black Nickel Plated | |
| M5×25 FHCS | 4 | Black Nickel Plated | |
| M5 Post-install T-nut | 35 | / | |
| M5 Hammer Head T-nuts | 30 | / | |
| M3 Hammer Head T-nuts | 65 | / | |
| M3 Nut | 6 | Black Nickel Plated | |
| M4 Nut | 4 | Black Nickel Plated | |
| M5 Nut | 9 | Black Nickel Plated | |
| M4×30 FHCS | 4 | Black Nickel Plated | |
| M3 Brass heatstake inserts – short M3x5x4 | 120 | / | |
| M3Shim 3×7×0.5 | 2 | Black Nickel Plated | |
| M5 1mm Shim 5×10×1 | 24 | Black Nickel Plated | |
| M5 rubber gasket 5×10×1 | 12 | / | |
| M2x10 Self Tapping Screws for Plastic | 12 | Black Nickel Plated | |
| M3×6 FHCS | 24 | Black Nickel Plated | |
| M3×6 BHCS | 10 | Black Nickel Plated | |
| M5×45 BHCS | 4 | Black Nickel Plated | |
| 6mm x 3mm Round Neodymium Magnets | 8 | / | |
| Aluminum column φ5×8×8 | 4 | / | |
| “Frame | 2020 Extrusion 310mm long | 1 | / |
| “Electronics | Nema17 17HS16-2004S1 | 2 | SIBOOR |
| 24V to 5V DC Voltage Reducer | 1 | / | |
| NEMA14 36mm pancake Motor with 10 tooth gear | 1 | OMC | |
| 5015 blower fans 24V | 1 | SIBOOR | |
| 4010 axial fan 24V | 1 | SIBOOR | |
| 6020 axial fan 24V | 1 | SIBOOR | |
| IEC320 C14 inlet | 1 | / | |
| Stealthburner Neopixel RGBW leds | 1 | SIBOOR | |
| Omron TL-Q5MC2-Z | 1 | OMRON | |
| ADXL345 PCB | 1 | / | |
| ADXL345 lineup | 1 | SIBOOR | |
| E3D V6 hotend | 1 | SIBOOR | |
| 24V 65W Heating（6×15mm Wire length 15cm） | 1 | SIBOOR | |
| NTC 3950 100K（3×15mm Wire length 15cm） | 1 | SIBOOR | |
| klipper expansion board | FYS | ||
| MINI 12864 display | 1 | FYS | |
| STM32 for MINI 12864 Display Converters | 1 | FYS | |
| TYPE-C cable 0.75 meters | 1 | / | |
| Android Data Cable 0.5m | 2 | / | |
| LED strip light 24V white 100mm wide | 1 | / | |
| Micro Switch（15CM） | 1 | SIBOOR | |
| Cable Section | Toolhead PCB 14PIN+2PIN Teflon wire | 1 | SIBOOR |
| raspberry Power supply line | 1 | / | |
| Toolhead PCB（Stealthburner CW2 2PCS） | 1 | SIBOOR | |
| High Flex Wire 20gauge | 2 | / | |
| High Flex Wire 20gauge | 2 | / | |
| Nylon Cable Ties (1.8mm wide or smaller) | 50 | / | |
| “Motion | MGN12H 300mm linear guide | 5 | SIBOOR |
| GT2 20T Pulley (5mm ID 6mm W) | 3 | / | |
| F695 Bearing | 20 | NSK | |
| GT2 Open Belt LL-2GT-6 (6mm wide) – 1500mm | 1 | Gates | |
| “Buildplate | 235×235 Black PEI | 1 | / |
| “Panels | Deck left | 1 | / |
| Deck right | 1 | / | |
| Deck under | 1 | / | |
| Rear Panel | 1 | / | |
| Side Rear panel | 2 | / | |
| Top Rear Panel | 1 | / | |
| Side Clear Panel | 2 | / | |
| Door | 2 | / | |
| Top Clear Panel | 1 | / | |
| Black Door Closer (1KG) | 1 | / | |
| “Misc. | Rubber Compressor Foot | 4 | / |
| 3M 5952 VHB tape 2CM×3M | 1 | 3M | |
| Openable drag chain 10×10 | 3 | / | |
| “Extruder | BMG Extruder Kit（With red POM gears） | 1 | SIBOOR |
1 review for Ender 3 V2/Ender 3 Pro Upgrade to VORON E3-Switchwire Kit
Only logged in customers who have purchased this product may leave a review.
Ian Hirsch (verified owner) –
Great little printer kit. Came with just about everything you could think of to trick out an ender 3 pro. My kit didn’t include a spring for the stealthburner, but overall I would recommend this kit as a fun project.