Description
$619.00 – $665.00
This is SIBOOR’s upgrade of V0.2 kit, not an official VORON upgrade. So we named it SIBOOR V0.2 R1 [Aug,2023].
There are major upgrades.
1: Pro Version shipping with the popular Kirigami sheet metal bracket upgrade, providing greater print stability and less prone to deformation or distortion. Additionally, it provides a configurable RGB indicator to the front panel with a variety of state-based lighting effects for visual feedback.
2: We’ve upgraded the silicone heater for your build plate from 60W to 75W to improve overall heating speed and to provide less thermal variance while printing.
3: New mini-stealthburner with hot-end umbilical toolboard for easier maintenance, cable management and upgrades.
Weight | 7.5 kg |
---|---|
Dimensions | 31 × 31 × 36 cm |
Hotend | TZ-V6 2.0 Hotend, Phaetus Dragon HF hotend |
Category | Description | / | Qty |
In the tools box | 3x6x0.5 Shim Washer | 10.9 Nickel plating | 41 |
In the tools box | M2 Nut | 10.9 Nickel plating | 64 |
In the tools box | M3 Nut | 10.9 Nickel plating | 161 |
In the tools box | M2x6 SHCS | 10.9 Nickel plating | 81 |
In the tools box | M2x6 FHCS | 10.9 Nickel plating | 12 |
In the tools box | M2x8 SHCS | 10.9 Nickel plating | 12 |
In the tools box | M3x6 BHCS | 10.9 Nickel plating | 54 |
In the tools box | M3x8 BHCS | 10.9 Nickel plating | 133 |
In the tools box | M3x8 FHCS | 10.9 Nickel plating | 6 |
In the tools box | M3x10 BHCS | 10.9 Nickel plating | 35 |
In the tools box | M3x12 BHCS | 10.9 Nickel plating | 29 |
In the tools box | M3x16 BHCS | 10.9 Nickel plating | 12 |
In the tools box | M3x25 BHCS | 10.9 Nickel plating | 12 |
In the tools box | M3x30 BHCS | 10.9 Nickel plating | 12 |
In the tools box | M3x35 BHCS | 10.9 Nickel plating | 35 |
In the tools box | M3x40 BHCS | 10.9 Nickel plating | 12 |
In the tools box | M2x10 Self Tapping Screws for Plastic | 10.9 Nickel plating | 35 |
In the tools box | M3 Brass heatstake inserts – short M3x5x4 | / | 58 |
In the tools box | M3 t-nut | / | 2 |
In the tools box | F623-RS Bearing | / | 24 |
In the tools box | yellow die springs 8x4x20mm | / | 3 |
In the tools box | Little Rubber Feet | / | 4 |
In the tools box | 6mm x 3mm Round Neodymium Magnets | / | 8 |
In the tools box | Hexagonal nylon screw post | / | 4 |
In the tools box | Bondtech BMG Extruder Kit | / | 1 |
In the tools box | CNC POM 50-tooth gear | Siboor | 1 |
Frame | EXTRUSION 15×15 200mm | Siboor | 16 |
Electronics | LM200-20B24R2 200W Power | Mornsun | 1 |
Electronics | Gemini V3 | Mellow | 1 |
Electronics | MicroSD Card | Sandisk | 1 |
Electronics | USB WIFI module | / | 1 |
Electronics | NEMA14 Stepper Motor 40Ncm | Siboor | 2 |
Electronics | NEMA17 Stepper Motor w/ integrated lead screw 200mm T8x8 | Siboor | 1 |
Electronics | Nema14 Motor 14RE08-1004S-H | stepperonline | 1 |
Electronics | 3010 blower fans 24V | Siboor | 2 |
Electronics | 3010 axial fan 24V | Siboor | 2 |
Electronics | Micro Switch | / | 1 |
Electronics | C13 Power Cord | / | 1 |
Electronics | IEC320 C14 inlet | / | 1 |
Electronics | SIBOOR CHC V6 Hotend(24V 60W) | Siboor | |
Electronics | V0-Display | Siboor | 1 |
Electronics | 3M 5952 VHB tape | 3M | 1 |
Electronics | High Flex Wire 20gauge | / | 2 |
Electronics | 7mm x 7mm cable chain (less than 1/2 meter needed) | / | 1 |
Electronics | ADXL345 | / | 1 |
Electronics | ADXL345 flat cable | Siboor | 1 |
Electronics | Nylon Cable Ties (1.8mm wide or smaller) | / | 50 |
Electronics | Hotend LED+Ptfe cable | / | 1 |
Electronics | Heatbed Neoplxel PCB | Siboor | 1 |
Electronics | XH2.54 cable(1000mm) | Siboor | 3 |
Electronics | WAGO 221-412 | Siboor | 1 |
Electronics | XH PCB 2p-2p | Siboor | 1 |
Electronics | V0-Umbilical | Siboor | 1 |
Electronics | V0-Umbilical 14PIN flat cable | Siboor | 1 |
Motion 传动 |
MGN7H Linear Rail with Carriage – 150mm | Siboor | 5 |
Motion 传动 |
MGN7H guide rail metal fixing strip | Siboor | 5 |
Motion 传动 |
GT2 20T (5mm ID 6mm W) | Powge | 2 |
Motion 传动 |
GT2 Open Belt (6mm W) – 3000mm | Gates | 3 |
Buildplate | 6061 1/4″ Plate – 120x120mm | Siboor | 1 |
Buildplate | Silicone DC 24V Heater 100x100mm 75W | Siboor | 1 |
Buildplate | Pro+ 3M 468MP (200MP) | Siboor | 1 |
Buildplate | Kirigami | ||
Panels 面板 |
PC panel Clear – 212x230x3mm | PC panel | 2 |
Panels 面板 |
PC panel Clear – 212x239x3mm | PC panel | 1 |
Panels 面板 |
Upper Rear Panel 212x63x3mm | PC panel | 1 |
Panels 面板 |
Lower Rear Panel 212x185x3mm | PC panel | 1 |
Panels 面板 |
Deck Panel 3mm thick (See DXF) | PC panel | 1 |
Panels 面板 |
Motor Panel 3mm thick (See DXF) | PC panel | 1 |
Panels 面板 |
Bottom Panel 3mm thick (See DXF) | PC panel | 1 |
Panels 面板 |
Mid Panel 3mm thick (See DXF) | PC panel | 1 |
Misc. | Bowden Tube 4x2mm – 1m | / | 1 |
Misc. | Bowden Tube 4x3mm – 1m | / | 1 |
Misc. | Screwdriver (M1.5/2/3) | Siboor | 3 |
Extrusion Tophat | Top Panel 212x212mm | PC panel | 1 |
Extrusion Tophat | Side Panels 212x71mm | PC panel | 4 |
Extrusion Tophat | Makerbeam XL 15×15 200mm | SIBOOR | 4 |
Extrusion Tophat | Makerbeam XL 15×15×80mm | SIBOOR | 4 |
Misc. | Full set of prints(ABS+) | ESUN | 1 |
Only logged in customers who have purchased this product may leave a review.
Balint Radocz (verified owner) –
The kit is of good quality and well packaged. Service seems to be improved soon after feedback. I recommend to pick a better textured PEI bed though – PETG can destroy the (currently) stock coating. While using the current documentation you might need to jump between/interpret pages so I strongly advise to read all related docs before building.
Nice kit overall. Go Voron Go! 🙂